Var Distribution - Home Theatre and Professional Installation Wholesale Distribution

CELabs Canada AV901HD 1 Input/9 Output HDTV Component Video Distribution Amplifier with Digital Audio

MSRP $499.99 Cdn

Back to Celabs Main

CeLabs AV901HD Hdtv Component Video Distribution Amplifier

Click For Larger Image

CELABS AV901HD 1 Input/9 Output HDTV Component Video Distribution Amplifier with Digital Audio

OVERVIEW - Celabs av901hd 1 Input/9 Output HDTV Component Video Distribution Amplifier with Digital Audio:

The AV901HD from CE Labs distributes HDTV and analog television signals from a single A/V source to multiple television receivers. Now you can daisy chain to large number of televisions with equal picture quality. The AV901HD saves the expense of additional A/V receivers and allows up to 150 ft. runs.

FEATURES - Celabs AV901HD HDTV Distribution Amplifier:

  • 1-Input & 9-outputs
  • Allows any A/V source with Y, Cb, CR, or Y, PB, PR output components to distribute A/V to 5 different locations without any signal loss
  • Compatible with all HDTV, digital & analog video signals
  • Allows up to 150-ft runs

SPECIFICATIONS - CELABS CANADA AV901HD COMPONENT VIDEO DISTRIBUTION AMPLIFIER:

Video

  • Gain: 2 Volt unterminated, 1 Volt Terminated: 75 ohms + 5%

  • Input Impedance: 75 ohms + 5%

  • Output Impedance: 75 ohms + 5%

  • Video Insertion Loss: 50 Hz to 10 MHz < .40 dB

  • In to Out Isolation: 50 Hz to 10 MHz 32 dB Port to Port

  • Out to In Isolation: 50 Hz to 10 MHz 60 dB

  • Return Loss: 50 Hz to 10 MHz 20 dB

  • Video Bandwidth: > 100 MHz

  • Audio Response: > 100 KHz

Audio

  • Gain: Unity

  • Input Impedance: 22k ohm

  • Output Impedance: 1k ohm

  • THD: 0.05% at 1.0 Volts input level

  • Frequency Response: 20 Hz to 100 KHz

  • Channel Separation: > 75 dB @ 1 KHz

  • In to Out Isolation: 60 dB

  • Out to Out Isolation: 60 dB

  • Signal to Noise: 100 dB re 2 Volts (out)

Audio (Digital – AV501HD & AV901HD only)

  • Supports standard SPDIF digital audio. Unity gain when terminated into 75 ohms (2X gain high imp.). Greater than 50 MHz of bandwidth to ensure minimal degradation. (If not used for digital audio, this port can be used to switch standard video).

Power

  • Requirement: External 9 to 10 Volt AC @ 1000 mA with a 2.1 mm coaxial connector. Power supply is included.

Dimensions (W x H x D)

  • 33 X 16.5 X 3.2 cm

Weight

  • 1.88 kg

Manufacturer Homepage: www.cable-electronics.com

 
(C) 2008 VAR Distribution