Celabs CAT5RX HD Over LAN Audio/Video Receiver

MSRP $398.99 Cdn

Back to CeLabs Main

OVERVIEW - Celabs cat5rx HD Over LAN Audio/Video Receiver:

Distribute high definition component or composite video and digital or left or right audio over extended distances using CAT5 wire. Video & audio loop output to accommodate future expansion to additional CAT5 transmitters and receivers.

FEATURES - Celabs CAT5RX HD Over LAN Audio/Video Receiver:

• Cable length equalizer for long distances
• Video continuity LEDs to ensure all signals are transmitting
• IR port

SPECIFICATIONS - CELABS CANADA CAT5RX HD Over LAN DISTRIBUTION AMPLIFIER:

Video
• Nominal Input Level: 1 Volt peak to peak
• Gain: 1 Volt into 75 ohms (2 Volts unterminated)
• Input Impedance (CAT5 TX): 75 ohms
• Output Impedance (CAT5 RX): 75 ohms
• Isolation port to port: > 65 dB
• Isolation out to input: > 80 dB
• Return loss: > 30 dB
• Video bandwidth: > 50 MHz (HDTV requires 37 MHz min.)
• Distance: 300 feet @ 1080i (500 feet with CAT6 cable)
• 3 composite video signals may be substituted on the individual component video inputs (1000 Ft. max).
  Audio (Analog)
• Nominal Input level: 1 Volt peak to peak
• Gain: Unity (slightly reduced at max cable length)
• Input Impedance: 22k ohm
• Output Impedance: 1k ohm
• Frequency Response: 20 Hz to 20 KHz
• Signal to Noise: 80 dB @ 1 Volts out Audio (Digital)
• Supports standard SPDIF digital audio Power
• Requirement: External 9 or 10 Volt AC @ 600 mA with a (2.1 mm center) Coaxial connector.

• Dimensions (W x H x D) 11.1 X 8.9 X 2.5 cm

• Weight 0.88 kg
  
  NOTE: Composite video may be used for security or with standard monitors

Manufacturer Homepage: www.cable-electronics.com